Browse our entire line of quality Eschenbach products
The Telescope Mounting Adapter is designed to allow an Eschenbach Galilean telescope to be attached to a lens by an adhesive on the adapter so that no drilling is required. The adapter is threaded on the inside and will accommodate any of the Eschenbach Galilean telescopes--#1621, #1622-5, or #1623. (It is not recommended for use with Keplerian telescopes due the weight of the Keplerian telescope.)
The Telescope Mounting Adapter is suitable for single-vision spectacle lenses with a front plano base curve of up to +12.00 Diopters. When mounting, the distance between the perspective point and the edge of the carrier glass may not be less than 11 mm at any point.
The mounting process is simple: mark the front of the lens where you want the telescope mounted, copy the mark on the back of the lens, thoroughly clean the front side of the lens, screw the telescope into the Adapter, remove the protective paper over the adhesive ring on the Adapter and then affix the Adapter with telescope onto the outside of the lens. The 1673-02 package includes 2 Telescope Mounting Adapters as well as 2 replacement adhesive rings.
To all California residents - WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. To learn more click HERE!